Language
News
Sincerely work with you to move forward, cooperate with integrity, and create a better future
Current location:
Homepage
>
>
>
Insulation and maintenance of star unloader in winter

Insulation and maintenance of star unloader in winter

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-03-01
  • Views:0

(Summary description)In natural environments, the installation and application of star unloaders are usually more extreme, and this is also true in many outdoor natural environments.

Insulation and maintenance of star unloader in winter

(Summary description)In natural environments, the installation and application of star unloaders are usually more extreme, and this is also true in many outdoor natural environments.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-03-01
  • Views:0
Information

In natural environments, the installation and application of star unloaders are usually more extreme, and this is also true in many outdoor natural environments. From autumn to winter, the average temperature gradually becomes colder, especially in the northern region where the temperature difference is large and the star discharger continues to work. In the long-term operation of industrial equipment, effective moisturizing in winter cannot be ignored.

星型卸料器

  Golden Sunflower recommends the thermal insulation and maintenance of the star-shaped unloader in winter

When working under air pressure, the star discharger is usually installed at the discharge port. When the upper raw material enters the inlet, the rotating centrifugal impeller is used to transport the raw material and assume the sealing function. In the entire process of long-term operation and application of industrial equipment, lubrication protection is very critical. Lubrication maintenance can not only increase the service life of the star unloader, but also make it run stably during the working process, which is beyond the scope of actual effects and the use of high-quality raw materials.

卸料器

The star-shaped unloader of the unloader manufacturer is a continuous-running industrial equipment, and it is also very important to choose a lubrication protection device. The choice of grease is more effective than grease. The special grease has excellent adhesion to the passivation of stainless steel and is not easy to flow out; when used in places that are not easy to seal, it can simplify the structure of the air intake system and prevent rolling. Under long-term load and shock load, it still has excellent moisturizing ability.

卸料器厂家

The special lubricating oil for the star unloader has a long lubrication period and does not require frequent filling and replacement. The metal material components are treated with rust prevention, which relatively reduces the maintenance cost. The usable temperature range is very wide, and the usable working standard is also very wide. The average temperature in winter in North China is relatively low, so you can choose 00 grease, which is more suitable for the lubrication and sealing of mechanical equipment in winter. Effective maintenance and maintenance can make full use of the running-in period of the star unloader.

The above is the content collected by the editor of Jiangsu Jinkuihua Machinery Manufacturing Co., Ltd. If necessary, please contact us.

Scan the QR code to read on your phone

Related News

What

What are the debugging skills of the rotary valve?

Rotary valves are widely used. So, what debugging skills does it have? I believe that many of my friends don’t understand this very well. Let me briefly introduce it to you, let’s take a look!
2021-02-18
Failure

Failure analysis of rotary valve

1. Why is there no sound or no sound after some rotary valves are welded? This situation may be due to the excessive power density of the soldering iron that can be used during the soldering process (20-30W soldering iron is recommended) or the time may be too long, causing the solder joints between the pins of the rotary valve and the coil to be heated and melted. 2. Why do some rotary valves have a low, silent or sandy tone after welding? This situation may be that the current to start the rotary valve is too small or too large, causing the rotary valve to fail to sound normally.
2021-01-24
Tips

Tips for maintaining rotary valves in winter

How to maintain the rotary valve in winter? Do friends understand? Let’s take a look with the editor!
2021-01-16
Do

Do you know the rotary valve?

In some equipment, there is a component used to control the in and out of materials, which can be fully automatic or manually controlled. Rotary valve is one such part. Rotary valve is also called shut-off fan. Although they have different names, they are actually one thing. Let’s take a look with the editor below!
2021-01-12

Online Message

Username used for comment:
客户留言
Description:
验证码

Site navigation

金葵花

Home               News
Products           About Us
Honor               Contact

Contact Us

金葵花
jkh

Tel:0519-86482636

Mail:jkh@jsjinkui.cn

Address: Xvebu Town, Wujin District, Changzhou City, China​

JINKUIHUA

Follow us

金葵花
  • jkh

    Mobile website

  • jkh

    Wechat

Changzhou  Jinkui Machinery Manufacturing Co., Ltd.  苏ICP备19034381号-1     www.300.cn